Emerson Rosemount 356, Справочное руководство

Страница: 10 / 36

Reference Manual
00809-0100-4856 Rev AE
February 2020
Rosemount 356
SECTION 2: INSTALLATION OF INSTRUMENT SIDE ONTO
DEVICE
Overview .................................................................................... page 2-1
Safety Messages ....................................................................... page 2-1
General Considerations ........................................................... page 2-2
Electrical Considerations ........................................................ page 2-2
Mechanical Considerations ..................................................... page 2-4
Installation Procedure .............................................................. page 2-5
SAFETY MESSAGES
Procedures and instructions in this section may require special
precautions to ensure the safety of the personnel performing the
operation. Refer to the following safety messages before performing
an operation preceded by this symbol.
Warnings
WARNING
Electrical shock can result in death or injury.
•
Avoid contact with the connector leads and device terminals
WARNING
When installing the instrument side of the connector onto the
housing of the device, take care to prevent the lead wires from
becoming twisted or from being cut by any potential sharp edges
inside the electronics housing. The same care must be taken when
removing the connector from the device.
OVERVIEW
This section contains the following installation considerations:
•
General Considerations
•
Electrical Considerations
o
Polarity
o
Factory Installed Instrument Side Connector
o
Customer Installed Instrument Side Connector
•
Mechanical Considerations
•
Installation Procedure
o
Preparation of the Instrument Side Connector
o
Installation of the Instrument Side onto 3152 Pressure
Transmitter
o
Electrical Connection to 3152 Pressure Transmitter