Emerson Rosemount 1408H Скачать руководство пользователя страница 36

Страница: 36 / 98

5.3

Get started with your preferred configuration
tool

5.3.1

IO-Link configuration tools

Examples:

•

Rosemount IO-Link Assistant (available as accessory)

•

FDT

frame applications, e.g. PACT

ware

5.3.2

Rosemount IO-Link Assistant

Get the latest IODD files

The Rosemount IO-Link Assistant software checks and lets you download the latest IODDs
for your device catalog.

Prerequisites

For an online update, an internet connection is required.

Procedure

1. Click the

icon.

The

Device description files (IODD): download and install

window opens.

2. In the

Vendor

list, select

Rosemount Inc.

, and then select the check box for the

devices to be installed/updated.
Alternatively, select

Browsing

and navigate to an already downloaded IODD file.

3. Select

Configuration

Reference Manual

September 2020

00809-0100-4480

Rosemount 1408H Level Transmitter

Содержание Rosemount 1408H



































































































Результаты поиска

Содержание Rosemount 1408H

Отзывы:

Emerson Rosemount 1408H, Справочное руководство, Страница: 36 / 98

Результаты поиска

Содержание Rosemount 1408H

Отзывы: