16
ETL Model No.: CF965
6. Installation of Downlight
6.3
Remove one of the three #8-32 x 1-1/4” slotted phillips
head screws from the light kit cover (Figure 25). Retain the
screw for future installation. Loosen the other two screws
several turns.
6.4
Carefully tuck all the wires under the light kit assembly
prior to installing the light kit assembly onto the light kit
cover.
6.5
Install the light kit assembly onto the light kit cover by
aligning and engage the radial slots of the light kit with the
loosened screw heads on the cover.
6.6
Rotate the light kit assembly to engage the two loosened
screws.
6.7
With the light kit locked into position, tighten the two
previously loosened screws
6.8
Reinstall the #8-32 x 1-1/4” slotted phillips head screw
(previously removed) into the light kit assembly to
complete installation of the light kit.
8-32 x 1-1/4" SLOTTED
PHILLIPS HEAD SCREWS (3)
LIGHT KIT ASSEMBLY
LIGHT KIT
COVER
ROTATE LIGHT KIT ASSEMBLY
CLOCKWISE TO ENGAGE
Figure 25
To avoid possible fire or shock, do not pinch wires
between the light kit assembly and the light kit cover.
WARNING
!
Check to see that all connections are tight and that no
bare wire is visible at the wire connectors.
WARNING
!
6.1
Remove the pre-installed wire nut from the fan motor
assembly white wire. Carefully straighten the white wire
strands. Pair the light kit assembly white wire with the
motor assembly white wire and install the previously
removed wire nut (Figure 24).
6.2
Remove the pre-installed wire nut from the fan motor
assembly black wire. Carefully straighten the black wire
strands. Pair the light kit assembly black wire with the
motor assembly black wire and install the previously
removed wire nut (Figure 24).
FAN MOTOR ASSEMBLY
WHITE WIRE
FAN MOTOR ASSEMBLY
BLACK WIRE
LIGHT KIT ASSEMBLY
WHITE WIRE
LIGHT KIT ASSEMBLY
LIGHT KIT
ASSEMBLY
BLACK WIRE
Figure 24
Spare #8-32 x 1-1/4” slotted phillips head screw is
provided in parts bag if needed.
