2
PACSystems™ RSTi
-EP EPSCPE100 Standalone CPU Quick Start Guide
GFK-3012E
User Features
The PACSystems
™
RSTi-EP EPSCPE100 (or CPE100), is an enhanced performance
standalone 1GHz programmable controller equipped with 1 MB of user memory and
four Ethernet ports. It is designed to run real-time, deterministic control applications
and supports distributed I/O.
LAN 1 is a dedicated high-speed Ethernet port. LAN 2 is comprised of 3 switched ports
configurable as either an embedded Ethernet controller or an embedded PROFINET
controller supporting PROFINET simplex mode. All four ports are located on the front
panel, as shown in Figure 1.
The CPE100 is programmed and configured over Ethernet via PAC Machine Edition
(PME) software. It can control/process up to 2K I/O points.
Features include:
•
A built-in PACSystems RSTi-EP PLC CPU
o
User may program in Ladder Diagram, Structured Text, or Function Block
Diagram.
o
Contains 1Mbytes of configurable data and program memory.
o
Supports auto-located Symbolic Variables that can use any amount of user
memory.
o
Reference table sizes include 2k bits for discrete %I and %Q and up to 32k
words each for analog %AI and %AQ. Bulk memory (%W) also supported for
data exchanges.
o
Supports up to 512 program blocks. Maximum block size is 128KB.
•
The embedded communications interface has dedicated processing capability,
which permits the CPU to independently support LAN 1 and LAN 2 with:
o
Up to 16 combined SRTP Server and Modbus TCP Server connections out
of which Modbus TCP cannot exceed more than 8 connections (or) up to
16 simultaneous SRTP Server connections (or) up to 8 simultaneous
Modbus TCP Server connections.
