Emerson PACMotion IC830DP 01207, Руководство по аксессуарам

Страница: 29 / 36

PACMotion™ Servos Accessories Guide Section 8
GFK-3173C December 2020
Motor Chokes 23
8.2 Safety Instructions
CAUTION
⚫
Before starting mounting/installation work, you must read and observe the instruction manuals
and the safety instructions that they contain for the drive and motor that you are using in your
application.
⚫
This manual is only valid in conjunction with the instruction manuals for the drive and motor you
are using in your application.
⚫
Mount the motor choke on a conductive earthed plate in the switchgear cabinet.
⚫
The choke can become hot during operation (rising to temperatures in excess of 80 °C).
Therefore, you should make sure that the choke is mounted a sufficient distance away from
neighboring components.
⚫
Provide the requisite conditions for unobstructed convection to cool the choke.
⚫
A connection diagram appears in the drive instructions manual.
⚫
If the motor cable is longer than 25 m, then the motor choke is wired into the cable close to the
amplifier. When laying the motor cable, allow about 400 mm for the connection to the choke.
8.3 Type Assignment
Drive* Motor choke Approvals Condition
IC830DP003x to
IC830DP006x
3YLN-06 CE, UL Motor cable > 25m
IC830DP012x 3YLN-14 CE, UL Motor cable > 25m
IC830DP024x 3YLN-24 CE, UL Motor cable > 25m
*IC830DP part numbers indicate continuous current rating (-003 is 3 A, -012 is 12 A, etc).