4
UNPACKING AND SET UP
• Carefully remove the unit from the carton and remove all packing materials
from the unit.
• The AC power cord is separate from the main unit. Make sure that the power
cord is not accidentally thrown away with the packing materials.
• Carefully remove any small strips of tape which may have been used to keep
the CD and Cassette doors closed during shipment.
• Open the CD compartment by lifting the “
OPEN
” tab on top panel. Inside the
CD compartment you will see a white transit card which is used to prevent the
laser pick-up from moving during shipment. Carefully remove this card and
close the CD compartment door.
• Please save the carton and packing materials in the event that your unit ever
needs to be returned for service. The original carton and packing materials are
the only way to protect the unit from damage during shipment.
• Unwind the FM lead wire antenna and extend it to its full length.
• Remove the twist-tie from the AC power cord and extend it to its full length.
PREPARATION FOR USE
MS7622_031504.p65
15/3/2004, 11:54
4
