11
BBS (Bass Boost) Switch
This system includes a
BBS
(Bass Boost) button that provides increased bass
response, especially at lower listening levels. Press the
BBS
button once to turn
the Bass Boost circuit
‘ON
’
. Press the
BBS
button again to turn the Bass
Boost circuit
‘OFF
’
.
Note
: If you experience any distortion when listening at high volume levels,
turn the Bass Boost ‘off’.
LISTENING TO THE RADIO
• Make sure that the FM Wire antenna is extended to its full length.
1.) Press the
POWER
button to turn the unit
“
ON
”. The
POWER
indicator comes ‘on’.
2.) Slide the
FUNCTION
selector switch to
RADIO.
3.) Slide the
BAND
switch the
FM ST., FM
or
AM
position to select the radio band as desired.
4.) Turn the
TUNING
control to tune to the desired radio station.
Note:
If you tune to an FM Stereo station and
the
BAND
selector is set to
FM ST
, the
FM STEREO
indicator will light.
If the FM reception is noisy or weak you may be able to improve it by
sliding the
BAND
selector to the
FM
(Mono) position, however the sound
will no longer be in stereo.
5.) Adjust the
VOLUME
and
BBS
controls as desired.
6.) When you are finished listening press the
POWER
button to the
“OFF
”
position. All
indicators go ‘off’
OPERATING INSTRUCTIONS
MS7622_031504.p65
15/3/2004, 11:54
11
