Emerson Liebert IntelliSlot IS-WEB485ADPT, Руководство по установке

Страница: 46 / 60

Connect to the Card - Terminal Emulation, Telnet or Web Interface
A2
A.2 C
ONNECT TO THE
C
ARD
- T
ERMINAL
E
MULATION
, T
ELNET OR
W
EB
I
NTERFACE
Upgrading the firmware requires connecting to the card with one of these interfaces.
A.2.1 Open the Terminal Emulation Interface - Serial Connection
To connect to the card using terminal emulation software with a
serial connection to the Web card:
1. Open a terminal emulation application, such as
HyperTerminal.
To do this:
• Click the Start button, then Programs , Accessories ,
Communications and finally HyperTerminal .
2. In the Connection Description window, enter a name for the
connection—for example, GXT2U —then click OK .
3. In the Connect To window:
• Choose COM3 from the Connect Using drop-down list.
• Click OK .
4. In the COM3 Properties window, enter the communication
settings shown in Table A3 .
5. When the message at right appears in the HyperTerminal
window, press the Enter key.
A.2.2 Open the Terminal Emulation Interface - TCP/IP Connection
To connect to the card using terminal emulation software with
an Ethernet connection to the Web card:
1. Open a terminal emulation application, such as
HyperTerminal.
To do this:
• Click the Start button, then Programs , Accessories ,
Communications and finally HyperTerminal .
2. In the Connection Description window, enter a name for the
connection—for example, GXT2U —then click OK .
3. In the Connect To window:
• Choose TCP/IP (Winsock) from the Connect Using
drop-down list.
• Enter the IP address of the Web card—for example,
192.168.0.125 —in the Host Address box, then click OK .
4. When the message at right appears in the HyperTerminal window,
press the Enter key.
5. Enter the Administrator username and password (both are case-
sensitive):
a.
Login (username—default is Liebert )
b. Password (default is Liebert )
Name
COM3
Connection
settings
Table A3 Communication settings
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Name
TCP/IP
(Winsock)
RTCS v2.96.00 Telnet server
Service Port Manager Active
<Esc> Ends Session
Login: Liebert
Password: ********