background image

17

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: CF320

This product is designed to use only those parts supplied
with this product and/or any accessories designated
specifically for use with this product by Emerson Electric
Co. Substitution of parts or accessories not designated
for use with this product by Emerson Electric Co. could
result in personal injury or property damage.

WARNING

!

See your local Emerson dealer, www.emersonfans.com or
the Emerson Ceiling Fan catalog for these accessories:

· Ceiling Fan Controls

· Downrod Extension Kits 

10. Accessories

The use of any other control not specifically approved for
this fan could result in fire, shock and personal injury.

WARNING

!

Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.

WARNING

!

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.

Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.

9. Maintenance

BP7514 CF320 Keane 12 2015_CF320  1/7/16  10:43 AM  Page 17

Содержание KEANE CF320BS00























Отзывы: