7. Installing the Wall Control
(Continued)
7.3
Attach the SW46W Fan Control to the wall outlet box with
two 6-32 x 3/4” screws (provided with control).
Position the faceplate (provided with control) onto the
speed control. Using the two 6-32 x 1/4” screws, screw the
faceplate and speed control to the wall outlet box (Figure
26).
Restore power at the main fuse box or circuit breaker
panel.
6-32 x 1/4" SCREWS (2)
FACEPLATE
SW46 FAN CONTROL
WALL OUTLET BOX
4
0
3
2
1
6-32 x 3/4"
SCREWS (2)
Figure 26
16
ETL Model No.: CF320
8.1
IMPORTANT
Fan installation must be completed, including the
installation of the fan blades, before testing of the
controls.
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
Check the operation of the fan by sliding the bar of the
control through the four positions marked 1 - 4
(“0” position is OFF) (Figure 27).
8. Using Your Ceiling Fan
4
0
3
2
1
Figure 27
8.2
All fans are shipped from the factory with the reversing
switch positioned to circulate air downward. If airflow is
desired in opposite direction, turn your fan OFF and wait
for the blades to stop turning, then slide the reversing
switch to the opposite position, and turn fan on again
(Figure 28).
The fan blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Season
Rotation Direction
Switch Position
Summer
Counter-Clockwise
Right
Winter
Clockwise
Left
REVERSING SWITCH
Figure 28
BP7514 CF320 Keane 12 2015_CF320 1/7/16 10:43 AM Page 16