Emerson insinkerator W152, Руководство пользователя

Страница: 14 / 16

14
If you a re still experiencing trouble c a ll the AnswerLine ™ 1- 8 00-55 8 -5700.
Please read Troubleshooting Guide and/or visit
www.insinkerator.com before calling AnswerLine
™
Alw a ys remove the power cord from its recept a cle before servicing the he a ter.
If the he a ter stops working:
■ ■
C heck the circuit breaker s upplying power to the outlet where the heater i s in s talled.
If the circuit bre a ker h a s tripped:
■ ■
Have the circuit checked by an electrician to determine if the circuit i s overloaded or if a s hort exi s t s .
If the circuit bre a ker h a s not tripped:
■ ■
Remove the power cord from it s receptacle.
■ ■
Remove the thermo s tat cover on the front of the heater.
■ ■
In s pect the heater for any frayed or loo s e elctrical connection s .
■ ■
Pu s h the red “re s et” button at the top of the thermo s tat compartment.
■ ■
If the button “click s ” when pu s hed, s omething ha s cau s ed the heater to overheat. Leave power cord unplugged and
contact your s ervice agency.
■ ■
If the button doe s not “click” when pu s hed, the element ha s probably burned out and s hould be replaced. C ontact
your s ervice agency.
If the w a ter over he a ts, or if ste a m is rele a sed from the relief v a lve:
■ ■
Unplug the power cord immediately.
■ ■
Allow tank to cool.
■ ■
Remove the cover on the front of the heater and check that the thermo s tat i s s eated firmly again s t the front of the tank
and that the mounting bracket i s s nug, but not over tightened.
■ ■
If there are any continued s ign s of overheating, di s connect the power and contact a qualified s ervice per s on.
Relief V a lve Oper a tion:
■ ■
If the relief valve weep s or drip s hot water, contact a qualified s ervice per s on. If a check valve i s in s talled in the hot water
line, an expan s ion tank mu s t be properly in s talled.
TROUBLESHOOTING