Emerson Fisher 2500, Инструкция по эксплуатации

Страница: 40 / 40

Instruction Manual
D200124X012
2500 and 2503 Controllers/Transmitters
June 2017
40
Key Description
21* Cover gasket, chloroprene
22* Relay gasket
Standard temperature, chloroprene
High temperature, silicon
23 Relay base
24* Relay base gasket (not shown)
Standard temperature, chloroprene
High temperature, silicon
25 Flexure strip, stainless steel,
26 Flexure strip nut, pl steel (2 req'd)
27 Flexure strip base, pl steel
28 Level set arm, pl steel
29 Drivelok pin, pl steel
30 Flapper base, brass, pl
31 Shaft clamp screw, SST (2 req'd for C version only,
1 req'd for all others)
32 Flapper, stainless steel
33 Alignment screw, brass, pl
34 Relay assembly
For all 2500 controllers/transmitters except 2503
Standard temperature
High temperature
Corrosive service
2503 only
Standard temperature
High temperature
35 Level adjustment assembly (controllers only)
35 Zero adjustment assembly (transmitters only)
36 Proportional band adjustment assembly
(except transmitters and 2503 controllers, see key 90)
Standard and high temperature
Corrosive service
37 67CFR regulator
38A* Filter gasket (not shown)
Standard temperature, chloroprene
High temperature, silicon
38B Spacer, aluminum (not shown)
38C* O‐ring (not shown)
Standard temperature, nitrile
High temperature, fluoroelastomer
39 Cap screw (not shown), pl steel (2 req'd)
Key Description
40 Hex nut, pl steel
(2 req'd for C versions, 1 req'd for all others)
41 Screw, pl steel (2 req'd for C versions only)
42 Machine screw, pl steel (8 req'd)
43 Machine screw, pl steel (2 req'd)
44 Machine screw, pl steel (6 req'd)
45 Machine Screw, pl steel (2 req'd)
46 Machine Screw, pl steel (4 req'd)
47 Spring (not shown), stainless steel
48 Cap screw, pl steel (4 req'd)
49 Machine screw, pl steel (13 req'd)
50 Screen, N04400
51 Pointer assembly (C versions only),
Stainless steel/brass, pl
52 Washer (C versions only), steel (2 req'd)
53 Base plate (C versions only), aluminum
54 Front plate (C versions only), aluminum
73 Pipe plug (2503 only), brass (not shown)
90 Specific gravity adjustment assembly
Standard and high temperature
Corrosive service
215 Nameplate
Heat Insulator (figure 14)
Note
All Heat Insulator parts are included in the Heat Insulator Parts Kit.
35 Heat Insulator Assembly, stainless steel
36 Shaft Coupling, stainless steel
37 Shaft extension, N05500
38 Set screw, stainless steel (2 req'd)
39 Cap screw, pl steel (4 req'd)
40 Cap screw, pl steel (4 req'd)
53 Washer, carbon steel, pl (4 req'd)
*Recommended spare parts
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E
1977, 2015 Fisher Controls International LLC. All rights reserved.
Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.