21
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF717-1
12. Installation of Light Kit Assembly
(Continued)
12.8
Cut the speed control switch pull chain and the light switch
pull chain to the desired lengths.
Attach each pendant/coupling assembly (supplied) to the
ends of each pull chain using the attached coupling
(Figure 35).
SPEED CONTROL
SWITCH PULL CHAIN
LIGHT CONTROL
SWITCH PULL CHAIN
COUPLING
SMALL WOOD
PENDANT
COUPLING
LARGE WOOD
PENDANT
Figure 35
Please
call
Emerson
technical
support
at
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.
13.1
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
Check the operation of the light by gently pulling on the
light switch pull chain (Figure 36).
Check the operation of the fan by gently pulling on the
speed control switch pull chain (Figure 36).
The operation sequence is as follows:
1st pull - High
2nd pull - Medium
Your fan is shipped from the factory with the reversing
switch positioned to circulate air downward. If airflow is
desired in opposite direction, turn the fan off and wait for
the blades to stop turning, then slide the reversing switch
to the opposite position, and turn the fan on again
(Figure 36). The fan blades will turn in the opposite
direction and reverse the airflow.
13. Using Your Ceiling Fan
SPEED CONTROL
SWITCH PULL
CHAIN
LIGHT CONTROL
SWITCH PULL
CHAIN
REVERSING
SWITCH
3rd pull - Low
4th pull - OFF
Figure 36
BP7483-2 ASHLAND CF717.qxp_BP7483 12/15/15 9:55 AM Page 21