20
ETL Model No.: CF717-1
12. Installation of Light Kit Assembly
(Continued)
12.6
Position the light switch pull chain through the center hole
of the glass shade.
Position the speed control switch pull chain through the
center hole of the glass shade.
NOTE:
Be sure that the fan switch chain does not
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch chain
from touching the light bulbs.
Place the glass shade onto the light kit assembly threaded
nipple (Figure 33).
SPEED
CONTROL
PULL CHAIN
LIGHT SWITCH
PULL CHAIN
THREADED
NIPPLE
GLASS
SHADE
Figure 33
12.7
Pass the light pull chain through the center bushing in the
bowl cap.
Pass the speed control switch pull chain through the offset
hole of the bowl cap.
Place the bowl cap on the threaded nipple and against the
glass shade (Figure 34).
Install finial nut finger tight to secure the bowl cap to the
glass shade (Figure 34).
BOWL CAP
GLASS
SHADE
FINIAL NUT
Figure 34
BP7483-2 ASHLAND CF717.qxp_BP7483 12/15/15 9:55 AM Page 20
