11
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF717-1
6. Hanging the Ceiling Fan
(Standard Method Using Hanger Ball/Downrod)
6.1
Carefully lift the fan assembly and seat the hanger ball in
the hanger bracket (Figure 14). The tab on the hanger
bracket must seat in the groove in the hanger ball.
HANGER
BRACKET
HOOK
TAB
GROOVE
HANGER
BALL
NOTE: CEILING COVER,
SUPPLY WIRES AND
FAN WIRES OMITTED
FOR CLARITY.
Figure 14
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and hanger
bracket.
WARNING
!
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
!
7. Hanging the Ceiling Fan
(Close-to-the-Ceiling Method with
Ceiling Cover Installed on the Motor Housing)
7.1
Carefully lift the fan assembly up to the hanger bracket.
Pass the hook on the hanger bracket (Figure 15) through
one of the screw holes (not the slots) in the ceiling cover
(Figure 15). The hook must pass from the inside of the
ceiling cover to the outside. The hook will hold the fan
assembly while connecting the wiring.
HOOK ON HANGER BRACKET
MUST PASS THROUGH SCREW
HOLE IN CEILING COVER, INSIDE
OF BRACKET TO OUTSIDE OF
BRACKET
HANGER
BRACKET
HOOK
CEILING
COVER
Figure 15
The hook must pass through the screw hole in the ceiling
cover from the inside to the outside. Any other hanging
method may cause the hook to break and the fan to fall.
WARNING
!
BP7483-2 ASHLAND CF717.qxp_BP7483 12/15/15 9:55 AM Page 11
