3.4
Remove one of the three #6 - 32 x 3/8” flat head screws
from the light kit cover (Figure 4). Retain the screw for
future installation. Loosen the other two screws.
Carefully tuck all the wires under the light kit assembly
prior to installing the light kit assembly onto the light kit
cover.
Place the light kit assembly onto the light kit cover.
Rotate the light kit assembly to engage the two loosen
screws and tight the two loosened screws.
Reinstall the #6 - 32 x 3/8” flat head screw (previously
removed) into the light kit assembly to secure.
#6 - 32 x 3/8" FLAT HEAD SCREWS
LIGHT KIT COVER
LIGHT KIT
ASSEMBLY
Figure 4
6
ETL Model No.: CF890
3. Ceiling Fan Assembly
(continued)
Figure 5
DOWNROD
PIN
SETSCREW
HANGER BALL
Figure 6
3.5
Turn the partially assembled ceiling fan right side up for
final preparation. Place the fan carefully onto the top of
the styrofoam as not to bend the ceiling fan blades
(Figure 5).
To avoid possible fire or shock, do not pinch wires
between the light kit assembly and the light kit cover.
WARNING
!
3.6
Remove the hanger ball by loosening the setscrew in
the hanger ball until the ball falls freely down the
downrod (Figure 6). Remove the pin from the downrod,
then remove the hanger ball. Retain the pin and hanger
ball for reinstallation in Step 3.11.
