3. Ceiling Fan Assembly
5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF890
3.1
Slide the fan blade through the blade slot in the blade
housing assembly.(Figure 1).
Mount the fan blade to the fan housing using three
#10 - 32 x 5/8” oval head blade screws (Figure 1).
NOTE: Take care not to scratch fan housing
assembly when installing blades.
Complete installation of the remaining two blades per
the above instructions.
#10 - 32 x 5/8" OVAL HEAD
BLADE SCREWS (3 per blade)
FAN
BLADE
BLADE SLOT
Figure 1
3.2
Remove one of the three #6 - 32 x 3/8” flat head screws
from the motor housing (Figure 2). Retain the screw for
future installation. Loosen the other two screws.
Place the lower light kit cover onto the motor housing.
Rotate the cover to engage the two loosen screws and
tight the two loosened screws.
Reinstall the #6 - 32 x 3/8” flat head screw (previously
removed) into the lower light kit cover to secure.
#6 - 32 x 3/8" FLAT HEAD
BLADE SCREWS
LOWER
LIGHT KIT
COVER
Figure 2
3.3
Engage the white connector wire from the fan motor
assembly to the light kit assembly white connector wire
until you hear a snap (Figure 3).
Engage the black connector wire from the fan motor
assembly to the light kit assembly black connector wire
until you hear a snap (Figure 3).
FAN MOTOR
ASSEMBLY
WHITE WIRE
FAN MOTOR
ASSEMBLY
BLACK WIRE
LIGHT KIT ASSEMBLY
WHITE WIRE
LIGHT KIT ASSEMBLY
BLACK WIRE
Figure 3
To reduce the risk of personal injury, do not bend the
blades when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
WARNING
!
