15
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF890
7. Wall Control Procedures
(continued)
7.8
Before installing wall control, place wall control in “OFF”
mode by pushing “ON/OFF” switch to the “OFF”
position.
7.9
Connect one black wire of wall control to the “hot” wire.
Securely connect wires with wire connectors supplied
(Figure 23).
7.10
Connect one black wire of wall switch to the “load”
(black) wire in wall box. Securely connect wires with
wire connector supplied.
7.11
Screw wall control into wall box using the supplied
screws. Leave wall control in “OFF” mode until fan
installation is completed.
7.12
The wall control is supplied with a white, ivory, and
almond color switch covers. Choose the finish that best
suits your needs and snap the cover onto the wall
control (Figure 23).
7.13
Install decorator wall plate using the two screws
provided with wall plate. Leave wall control in “OFF”
mode until fan installation is completed (Figure 23).
FAN/LIGHT WALL
CONTROL
WALL BOX
BLACK
BLK
HOT
SWITCH COVER
DECORATIVE WALL PLATE
SCREWS (2)
NEUTRAL
WIRES
TO
120VA
C SOURCE
TO LOAD
G
R
OU
ND
OFF
ON
....
Figure 23
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
WARNING
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
WARNING
!
