Emerson AXP 1410, Инструкция по установке и эксплуатации

Страница: 15 / 204

AXP 1410 Installation and Use (6806800H70F)
15
About this Manual
Overview of Contents
This manual is divided into the following chapters and appendix.
z
Chapter 1, System Overview, on page 23 , provides a brief introduction to the AXP 1410.
z
Chapter 2, Site Preparation, on page 37 , provides general information such as unpacking
the system, requirements, dimensions and weight.
z
Chapter 3, System Installation, on page 47 describes how to install, power up and power
down the system.
z
Chapter 4, FRU Installation, on page 63 describes how to install field replaceable units, such
as boards, power entry modules or fans.
z
Chapter 5, Configuring and Operating the System, on page 83 gives information on network
management, software, accessing system components, and power and cooling
subsystems.
z
Chapter 6, Supported IPMI Commands, on page 115 lists standard, PICMG, and Emerson-
specific IPMI commands.
z
Chapter 7, FRU Information and Sensor Data Records, on page 119 lists FRU information and
SDRs of PEMs and FTMs.
z
Chapter 8, Shelf Management Alarm Module, on page 165 describes the shelf management
alarm module.
z
Appendix A, Related Documentation, on page 173 lists relevant documentation and
specifications.
z
Safety Notes on page 175 lists all safety notes relevant for this system.
z
Sicherheitshinweise on page 187 is a German translation of the safety notes chapter.