![Emerson AXIMA 2000 Скачать руководство пользователя страница 42](http://html.mh-extra.com/html/emerson/axima-2000/axima-2000_installation-manual_102048042.webp)
33
Connections and Cabling
Figure 24
Drive Enable (Enable Contact) Circuit
In the event the Enable Contact is not used, the following power
sequence must be followed:
1.
Apply power to the AXIMA 2000/4000 controller
2.
Apply power to the drives
3.
Enable the drives
4.
Normal machine operation
5.
Disable or power down the drives
6.
Power down the AXIMA 2000/4000 controller
Drive Status and Overtravel
Drive Status or Overtravel inputs do not perform any pre-defined
action in the controller. They are available as pre-defined bits and
may be used in the AXIMA Software’s PLC, Motion or Auxiliary
Programs to perform desired logic.
Figure 25
Drive Status and Overtravel Input Circuit
It is recommended that the Enable Contact be used. If these contacts
are not used, physically connecting a drive (E Series, MX, LX or other)
to the controller while that drive is enabled may cause unwanted
motion.
ENABLE
CONTACT
9
21
CAUTION
!
1.2K
+ 5
+ 24 V
COMMON
AXIMA INPUT
LED
INPUT
2.21K
GND
2.21K
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание AXIMA 2000
