Emerson Avocent ACS 6000, Руководство пользователя

Страница: 44 / 93

38 ..... Avocent® ACS 6000 Advanced Console Server
Parameter Description
Flow Control
Defines the flow control as none, hardware, software, RxON software or TxON software.
Default: None.
CAS
Port Name
Name associated with the serial port (as an alias). Default: <appliance mac address>-p-<port
number>.
Enable Auto
Discovery The target name will be discovered and will be associated with this serial port. If it fails, the
Port Name will be used. Default: Disabled.
Enable Speed
Auto
Detection
Tries to discover the speed of the serial port. This feature requires additional configuration
under the CAS Profile / Auto Discovery / Settings page. Default: Disabled.
Protocol
The protocol that will be used by authorized users to access the serial port/target. The console
server accepts three protocols for connection to the target: Telnet for telnet connection, SSH
for secure connection and Raw Mode for raw socket connection. An administrator can
configure the port to accept one, two or all three types.
NOTE: Raw protocol requires the
configuration of the Raw Mode Port Alias. Default value: Telnet/SSH.
Authentication
Type Authentication type that will be used to authenticate the user during target session. Default:
Local.
Text Session
Hot Key
Hotkey to suspend the target session and go to the CLI prompt. Not available for Raw.
Default:
Ctrl-Z.
Note: The default escape character for ts_menu is
Ctrl-X.
Power
Session Hot
Key
Hotkey to suspend the target session and display Power Management Menu to control the
outlets merged to the target. Not available for Raw. Default:
Ctrl-P.
NOTE: The default escape character for ts_menu is Ctrl-X.
TCP Port
Alias
Telnet Port Alias: TCP port to connect directly to a serial port using Telnet protocol for the
connection. SSH Port Alias: TCP port to connect directly to a serial port using SSH protocol
for the connection/ Raw Mode Port Alias: TCP port to connect directly to a serial port using
raw socket for the connection.
Port
IPv4/IPv6
Alias
IPv4/IPv6 address used to connect directly to a serial port. Default: not configured (empty).
Port
IPv4/IPv6
Alias Interface
Interface (ETH0/ETH1) associated with the IPv4/IPv6 alias. Default: ETH0.
Allow Session
Only if DCD is
On
When the DCD is OFF, the appliance will deny access for this serial port. Default: Disabled
(allow access if DCD is OFF).
Enable Auto
Answer When the input data matches one input string configured in Auto Answer, the output string will
be transmitted to the serial port. Default: Disabled.
DTR Mode
DTR Mode can be set to the following: Always On. Normal - the DTR status will depend on the
existence of a CAS session. Off Interval - when the a CAS session is closed, the DTR will stay
down during this interval. Default: Normal.
DTR Off
Interval
Interval in seconds used by DTR Mode Off Interval in milliseconds. Default: 100.
Line Feed
Suppression
Enables the suppression of the LF character after the CR character. Default: Disabled.
Null After CR
Suppression
Enables the suppression of the NULL character after the CR character. Default: Disabled.