Emerson Avocent ACS 6000, Руководство пользователя, Страница: 75 / 93

Accessing the Console Server via the Web Manager ..... 69
NOTE: If you start another session with the console server while viewing this screen, it will not be visible
until you click
Refresh
at the top of the web manager window.
To kill an active session:
1. Click Active Sessions . The Active Sessions screen appears and lists all open sessions to the
console server by the user’s workstation IP.
2. Select the checkbox next to the session you want to kill, then click the Kill button. After a few
seconds, the Active Session screen will redisplay the open sessions, minus the one you killed.
Monitoring
When you click Monitoring, a variety of network and console port information is available for
viewing. The screens are only for viewing and have no interactivity with the user. The following table
shows the types of information available.
Screen
Name
Definition
Network -
Devices Shows Ethernet ports and PC card Device Name, Status (enabled/disabled), IPv4 Address,
IPv4 Mask and IPv6 Address (not available on all models).
Network -
IPv4 Routing
Table
Shows Destination, Gateway, Genmask, Flags, Metric, Ref, Use and lface.
Network -
IPv6 Routing
Table
Shows Destination, NextHop, Flags, Metric, Ref, Use and lface.
Serial Ports
Shows Device Name, Profile, Settings, Signals, TX Bytes, RX Bytes, Frame Error, Parity
Error, Break and Overrun. The Reset Counter button allows administrators to reset the statistic
counters for selected ports.
Fips Mode Shows Service Name and Mode Indication.
Monitoring Screens
Change Password
An administrator or user can change their own password from this screen.
To change your own password:
1. Select Change Password .
2. Enter the old password and new password in the appropriate fields.
3. Confirm the new password, then click Save .