Emerson Avocent ACS 6000, Руководство пользователя

Страница: 36 / 93

30 ..... Avocent® ACS 6000 Advanced Console Server
NOTE: The MAC Address for the device will be displayed after this option.
IPv4 and IPv6 static routes
To add static routes:
1. Select
Network - IPv4 Static Routes
or
IPv6 Static Routes.
Any existing static routes are listed
with their Destination IP/Mask, Gateway, Interface and Metric values shown.
2. Click
Add
.
3. Select Default to configure the default route.
-or-
Select Host IP Or Network to enter custom settings for Destination IP/Mask.
Enter the required Destination IP/Mask Bits with the syntax <destination IP>/<CIDR> in the
Destination IP/Mask Bits field.
4. Enter the IP address of the gateway in the Gateway field.
5. Enter the interface name (Eth0, Eth1 or PPPx) in the Interface field when the route is by
interface.
6. Enter the number of hops to the destination in the Metric field, then click Save
Hosts
An administrator can configure a table of host names, IP addresses and host aliases for the local
network.
To add a host:
1. Select Network - Hosts .
2. Click Add to add a new host.
3. Enter the IP address, hostname and alias of the host you want to add, then click Save .
To edit a host:
1. Select Network - Hosts .
2. Click on the IP address of the hostname you want to edit.
3. Enter a new hostname and alias, if applicable, then click Save .