7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: AL200
5. Installation for Ceiling Fan CF5100 & CF5200
5.1
Position the LED Accent Light Fixture so that the
Downrod passes through the opening of the LED
Accent Light Fixture.
Align the LED Accent Light Fixture Female 2-Pin
Connector with the Motor Housing Assembly Male
2-Pin Connector (Figure 9).
NOTE: Be sure the LED Accent Light Fixture
Connector is located close to the Motor Housing
Assembly Connector for ease of installation.
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
Figure 9
5.2
Install the LED Accent Light Fixture to the Motor
Housing Assembly using the three #8-32 Pan Head
Screws (supplied) (Figure 10).
MOTOR
HOUSING
ASSEMBLY
LED ACCENT
LIGHT
FIXTURE
#8-32 x 8mm
PAN HEAD
SCREWS (3)
Figure 10
5.3
Securely engage the LED Accent Light Fixture Female
2-Pin Connector with the Motor Housing Assembly
Male 2-Pin Connector (Figure 11).
For storage of excess Connector Wire, tuck the
Connector Wire along inside edge of the LED Accent
Light Fixture (Figure 11).
CONNECTOR
WIRE STORAGE
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
Figure 11
To avoid possible fire or electric shock, be careful not
to pinch wires under the LED Accent Light Fixture
during assembly.
WARNING
!
#8-32 PAN HEAD
SCREWS (3)
