(1) Cord guide
(4) Strut channel nut
(2) Stop plate
(1) 1.25 OD Washer
(4) Hex head cap screw,
1/4 x 20 x 1
(20)Nylon lock nut, 1/4 x 20
(2) Carriage bolt,
1/4 x 20 x 1-1/2
(24)1/4” Flat Washer
(1) Pan head machine screw,
1/4 x 20 x 7/8
(2) Shock cord
(4) Lock washer
(1) Adjustable mount
(1) Fixed mount
(1) Adjustable arm
(1) Front cradle
(1) Inside side catch
(1) Outside side catch
(1) Fixed catch
(17)Carriage bolt,
1/4 x 20 x 3/4
(1) Safety cable assy.
(3) Rail
(2) Connecting bracket
(3) Mounting bracket
(1) Vinyl cap
(8) 1/4 x 14 self drilling
screw
(1) Rear mounting bracket
To reduce the risk of serious personal injury, read and follow all instructions and warnings before installing or using this product.
Weather Guard recommends the Model 250 sliding ladder rack be installed in service or delivery vans equipped with a bulkhead.
A bulkhead divider between cargo and driver/passenger compartment reduces the likelihood material will come forward and cause
personal injury during a vehicle accident.
Part No. 24-0208
• Electric Drill
• 5/16” Hex Driver Bit
• Phillips Screw Driver
• Ruler
• 7/16” Wrench
• 7/16” Deep Well Socket
• Ratchet Wrench
• Lithium Grease
Approximate installation time: 60 minutes (1 hr.) depending on installer experience. Rail assembly installation requires 2 people.
OPERATORS MANUAL
SLIDING LADDER RACK
MODEL 250
WWW.WEATHERGUARD.COM
INSTALLATION TIME
TOOLS REQUIRED
PRODUCT REGISTRATION
Model #: ________250____________ Serial #: _______________________
Purchase Date: ______________________
Place of Purchase: ___________________
NOTE: This product is only intended for use inside a van, enclosed trailer or truck with metal cap.
–ATTENTION–
PARTS LIST
WARNING
