- 9 -
3)
Switch the trimmer on.
4)
Make well-controlled movements. Touch the hair/skin
lightly with the Trimmer (fig. 9).
Be careful when you are trimming without the comb as when
the trimmer is turned on it will trim every hair it touches.
CLEANING
1.
Clean the Trimmer after each use. Make sure the Trimmer is
switched OFF and disconnected from the electrical outlet.
2.
Remove the Trimming Comb and clean with the brush.
3.
Remove the cutting unit by pushing against the teeth of the
cutting unit (fig. 11) and rinse under warm tap water (fig. 12)
or use the brush supplied. Allow to air dry thoroughly.
4.
Place the cutting unit back by inserting the notch of the
cutting unit into the guiding slot (fig. 13).
5.
Push the cutting unit back into place on the Trimmer until
you hear a click (fig. 14).
6.
Use a soft, dry cloth to clean the Trimmer handle.
7.
Never immerse the Trimmer in water or rinse under the tap.
8.
Do not use abrasive cleaning agents, scourers or aggressive
liquids such as alcohol, gasoline, or acetone to clean the
Trimmer and attachments.
9.
Do not touch cutters with hard objects as this may damage
them.
STORAGE
⚫
Be sure trimmer is turned off and unplugged.
⚫
Store the appliance and its charger in a safe, dry location
where they will not be crushed, banged, or subject to
damage.
⚫
Do not wrap cord around the appliance when storing.
