- 7 -
3. The charge lamp lights up to indicate the appliance is charging.
After fully charging, the charge lamp will remain lighting.
4. Unplug and remove the cord (A) from the appliance.
Note
：
1.
Fully charge the Trimmer before using for the first time.
2.
Charging or using the Trimmer at temperatures below 4
℃
or higher than 35
℃
adversely affects lifespan of the battery.
3.
It will take approximately 8-10 hours to fully charge the
Timmer for a cordless trimming time of up to 30-35minutes.
4.
If Trimmer is subjected to a major change in temperature,
pressure or humidity, let the trimmer acclimatize for 30
minutes before using.
5.
Do not use the appliance when it is charging.
Optimize the working life of the battery
1.
After the Trimmer has been charged for the first time, do not
recharge the Trimmer between trimming sessions. Continue
using it until the battery is completely empty.
2.
Do not charge for more than 24 hours.
3.
Do not keep the charger permanently plugged in.
4.
Discharge/run down the battery completely twice a year by
letting the motor run until it stops.
5.
If the Trimmer hasn’t been used for a long period of time, it
must be recharged for a full 8-10 hours.
CORDLESS TRIMMING
1.
Slide ON/OFF switch to position “0” to turn on the appliance.
2.
When finished, slide to position “I” to turn off the appliance.
Note:
⚫
Always comb the beard and/or moustache with a fine comb
before you start trimming.
⚫
If you are trimming for the first time, be careful. Do not move
the Trimmer too fast. Make smooth and gentle movements.
1.
Trimming with the trimming comb
1)
Turn the adjustment ring to the desired trimming length
