4
GENERAL DESCRIPTION
“DIN Digital CL” measures and controls chlorine in industrial process. It is possible to set two ON/OFF setpoints and a current
signal for connecting a chart recorder or a metering pump. It is possible to set the current output on 0
÷
20 or 4
÷
20 mA. LCD
backlight display facilitates reading in high luminosity conditions. The instrument is cased into a plastic box for DIN mounting.
CONTROL PANEL
Into normal operating mode press “UP” or “DOWN” key for instrument’s details.
Use keyboard (up, down, left and right) to make a selection or change set values. Press the “RIGHT” key to go back in previous menu or cancel
entered data.
The “Enter” key confirms the selection.
Press “RIGHT” key for about 4 seconds to switch off the instrument (the display shows OFF). Repeat the sequence to return to the normal
operating mode.
To reset the instrument (restore default settings) unplug power supply and keeping pressed “UP” and “DOWN” keys, plug in power supply. The
instrument will show “Checksum Error- Press any key”. Press any key to continue.
Display
LCD backlight display
facilitates reading in high
luminosity conditions. It
provides constant indica-
tions regarding operating
conditions and equipment
status.
Introduction
A convenient keypad allows
easy and quick access to the
menu for easy programming
and calibrating operations.
Keyboard
“RIGHT” (ON/OFF - ESC) key
“ENTER” key
E
UP”
key
“DOWN”
key
9 . 9 9 C l
1 o n 2--
SetPoint status. Ex:
“1ON” setpoint 1 is
active.
“2--” setpoint 2 is not
active.
