Emdeon Vx570 User’s Guide
Chapter 1: Install Your Equipment
© 2011 Emdeon Business Services LLC. All rights reserved.
Page 4
This material contains confidential, proprietary information. Unauthorized use or disclosure of the information is strictly prohibited.
Modem Network Connection
If you use a high-speed modem or router to connect to a network, you will need an RJ45 network cable
(not included with your terminal).
1.
Attach one end of the cable to your high-speed modem or router.
2.
Connect the other end of the cable to the terminal 10BaseT outlet, as illustrated below.
Testing the Connection
1.
Press the asterisk key (
*
) until the Terminal Main Menu displays:
2.
Press
<F2>
to select
CommServer
.
3.
If
Connected
indicates
YES
, press
*
to return to the Main Menu. Your network connection has
been successfully established.
4.
If
Connected
indicates
NO
, disconnect and reconnect the power cable, and press <F2> from the
Main Menu to return to CommServer.
5.
If
Connected
still indicates
NO
, press
<Scroll Line
h
>
to select
Diag
.
6.
Press
<F2>
to select
Ping
.
7.
At the
Enter Ping Address
prompt, just press
. The PING address is pre-configured.
8.
If
No Response
or other error message is displayed, call Emdeon Customer Service at 800-333-
0263.
