EMD Serono cool.click 2 Скачать руководство пользователя страница 5

- 3 -

PCT-193  L3-0308

cAUTioN

Federal law (USA) restricts this device to sale by or on the order of a physician.

Section 1 

GETTING STARTED WITH cool.click™ 2

wHAT YoU’LL LEARN

In this section, you’ll learn:
•  The name of each cool.click™ 2 part
•  How to set the dose range of cool.click™ 2
•  How to attach the nozzle and piston onto cool.click™ 2
•  How to fill cool.click™ 2 with your dose
•  How to practice using cool.click™ 2 with a practice cartridge (or vial)

wHAT YoU’LL NEED

•  cool.click™ 2 device
•  nozzle and piston*
•  alcohol wipes*
•  sterile gauze pad or cotton ball*
•  practice cartridge (or vial)*
•  click.easy™ Demokit*
•  practice pad*
*Included in your Patient Starter Kit.

bEFoRE YoU GET STARTED

It is important to know the names of all cool.click™ 2 parts. To learn each of the names, unfold 
the front cover of this instructions for use. You’ll find a photograph of cool.click™ 2 with each 
part clearly labeled. Keep this page open as you learn how to use cool.click™ 2.

iMPoRTANT

Always wash your hands thoroughly with antibacterial soap and water before using cool.click™ 2. 
Make sure to use a clean towel when drying your hands. Then place all of your cool.click™ 2 
materials on a clean, dry surface.

Section 2 

SETTING cool.click™ 2 FOR mg OR ml USE

cool.click™ 2 has an LCD display for indicating the dosage. This can be set to read either milligram 
(mg) of growth hormone, Table 1, or milliliter (ml) of liquid dose, Table 2, which is specific to the 
EMD Serono growth hormone medication that your doctor has prescribed for you.
cool.click™ 2 can be set to one of six different dose ranges, indicated by the letters A to F at the 
top of the display. You doctor will tell you what setting you will need for cool.click™ 2.
Please ask your doctor or healthcare provider about setting the device.

cAUTioN

• 

On delivery, cool.click™ 2 will be in a “null” mode, and when it is first switched on the 

display will show as in the figure below. No dose can be displayed until the dosage range 

has been set.

 

Содержание cool.click 2
























Отзывы: