EMD Serono cool.click 2 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 23

EMD Serono cool.click 2 Скачать руководство пользователя страница 18

- 16 -

PCT-193 L3-0308

EMD Serono representatives will help you with reimbursement and billing issues.
Connections for Growth® and SerocareSM provide referrals to the EMD Serono Nurse Network
in your area. Nurses in the Nurse Network can answer your questions about proper use
and maintenance of cool.click™ 2, and can help you work through any problems you may
experience.
Connections for Growth® Toll-free: 800-582-7989 (US) • Website: www.howkidsgrow.com
Serocare

SM

Toll free: 800-714-2437 (US) • Website: www.serostim.com.

Section 8

QUICK GUIDE

How To DELivER YoUR DoSE
Using cool.click™ 2 - Preparation and Delivery

1. Rotate the rear housing to move toward the front housing as far as it

will go. A slight click may be heard.

2. Switch on the device, the display should show 0.00. If the display shows

8.8.8 flashing, further tighten the rear housing.

3. Connect the nozzle to the cartridge connector (as shown) or vial

connector.

4. Draw the solution of growth hormone medication into the nozzle. The

display will indicate the dosage drawn.

5. Wind one full turn past your dose setting and release any air bubbles

in the nozzle by tapping gently with your finger.

6. Wind back to your required dose. If air bubbles are still present in the nozzle, repeat step

5 until all air bubbles are gone.

«
...
16
17
18
19
20
...
»

Содержание cool.click 2
























Отзывы:

Нет отзывов