EMC DL3D 1500 Скачать руководство пользователя страница 107

Страница: 107 / 238

Configuring and managing NAS shares

107

Configuring and Managing Disk Backup

Table 9

NAS Share Summary fields

Editing NAS shares

To edit a NAS share:

1. To access the NAS page, on the Disk Backup Configuration

page, click NAS.

2. Click Edit to edit a NAS share. The Edit NAS Share page

appears.

3. Edit the NAS share information as desired.

Note:

If you are editing a share, only the Description and Enforce

read-only access to this share

options can be edited. You can also edit the

de-duplication settings, but you cannot disable de-duplication once it is
enabled.

4. Click Apply.

Deleting NAS shares

To delete a NAS share:

1. To access the NAS page, on the Disk Backup Configuration

page, click NAS.

Column

Description

Share Name

Lists the NAS share name.

Protocol

Lists the NAS protocol (CIFS or NFS) in use on the NAS
share.

Export Path

Lists the location of the export path for this NAS share.

De-duplication

Displays the de-duplication setting (Enabled or Disabled) for
this NAS share.

Backup Window

Displays (if enabled) the time window where de-duplication
will not be used.

Permissions

Displays the permission (Read & Write or Read Only) for the
NAS share.

Access

Lists the access type (All users or specific users) for this
NAS share.

Description

Lists the description for the NAS share (if available).

Содержание DL3D 1500















































































































































































































































Результаты поиска

Содержание DL3D 1500

Отзывы:

Бренды по названию

Популярные бренды

EMC DL3D 1500, Руководство администратора

Результаты поиска

Содержание DL3D 1500

Отзывы:

Бренды по названию

Популярные бренды