8
Step 5
Install the Storage System in the Cabinet
If your CX500i DPE2 enclosure or any DAEs are not already installed in a cabinet,
install them using the instructions for installing 3U devices in the
EMC Rails and
Enclosures Field Installation Guide
.
IMPORTANT
The disk modules in slots 0 through 4 of the DPE2 (enclosure 0,
loop 0) provide mirrored boot and recovery capability, and are preconfigured
according to their slot assignment before shipment. Do not move a module in
slots 0 through 4 from its assigned slot to another slot. Remove it only to replace a
failed disk.
