32
Step 16 Continued
Configure iSCSI Initiators on a Windows Server
for iSNS
Configure HBA Initiators on Windows Servers for iSNS
Use the QLogic SANsurfer package to configure the network parameters for each
HBA iSCSI initiator that needs access to the storage system.
1. Open QLogic SANsurfer as described in the QLogic documentation.
2. In the HBA tree, select the HBA and click the
HBA Options
tab.
The iSCSI name defaults to the iSCSI standard (iqn.xxxx).
3. Select
Enable iSNS
.
4. Set the iSNS server address automatically or manually:
For automatic setting - Select
Obtain iSNS server address automatically (via
DCHP
).
For manual setting - Select
Use the following iSNS server address
and enter the
IP address of the server.
5. Click
Save
to save the new settings.
What Next?
If you installed the Host Agent on the server, continue to Step 17,
to Register the Server NICs or HBAs
on page 33. If you installed the Server Utility on
the server, go to Step 18,
