EMC CX200-Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 90

background image

CX200-Series Components

1-3

About the CX200-Series DPE2

You can place the DAE2 in the same cabinet as the CX200, or in a
separate cabinet. The CX200-Series systems connect to the external
Fibre Channel environment using small form factor SFF LC optical
transceivers on the storage processor. High-availability features are
standard. The EMC Access Logix™ software option provides Storage
Group functionality for the CX200 and CX200LC.

CX200-Series Components

The CX200-Series storage system includes:

◆

A CX200 DPE2 consisting of
• A sheet-metal enclosure with a midplane and front bezel
• Two storage processors (SPs)
• Five to fifteen disk modules
• A single standby power supply (SPS)
• Two power supply/system cooling modules

Blowers integrated in the power/cooling modules cool the entire
enclosure. The CX200 does not require discrete fan assemblies.

or

◆

A CX200LC DPE2 with
• A sheet-metal enclosure with a midplane and front bezel
• One storage processor
• Three to fifteen disk modules
• One power supply/system cooling (power/cooling) module
• One blower module

Standard CX200 systems can support an optional single

DAE2 with

as many as fifteen disk modules.

Any unoccupied disk module slot has a filler module to maintain air
flow.

The storage processors, disk modules, power/cooling modules,
blower modules, and filler modules are field replaceable units
(FRUs). You can add or replace them without tools and, in most cases,
while the array is powered up.

The disk modules are FC-AL compliant and support dual-port FC-AL
interconnects through the storage processors and their cabling.

«
...
15
16
17
18
19
...
»

Содержание CX200-Series



























































































Отзывы:

Нет отзывов

Похожие инструкции для CX200-Series

Бренд: RaidSonic Страницы: 2

Бренд: In Win Страницы: 12

Бренд: D.A.S. Страницы: 15

Pure 591 415 01, Pure 591 417 01, Pure 591 515 01, Pure 591 517 01 Smart 591 435 01

Бренд: Spelsberg Страницы: 36

Bass Slammer TTP10

Бренд: MTX Страницы: 2

Бренд: Fantec Страницы: 15

Бренд: Rutenbeck Страницы: 2

illumiNITE XOBP12D

Бренд: Dual Страницы: 8

SUPER SONIC 412 SL

Бренд: Fender Страницы: 12

Бренд: Aukey Страницы: 18

Бренд: YORKVILLE Страницы: 1

Бренд: YORKVILLE Страницы: 2

Бренд: HEMCO Страницы: 12

Бренд: Vivotek Страницы: 2

Бренд: i-PRO Страницы: 2

Бренд: Raidon Страницы: 2

SafeTANK GR3660-TB2

Бренд: Raidon Страницы: 12

Бренд: Raidon Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды