46
Install - Step 11 continued
Prepare the servers
d. Follow the instructions on the installation screens and
accept all the defaults
.
e. If you are installing the server utility on a server that is using the Microsoft
iSCSI initiator to connect to the storage system, select
Yes
when prompted.
You have the option to launch the server utility after installation. Do not attempt to run the
utility at this time.
Install admsnap and/or admhost software
If you installed the SnapView
™
and/or SAN Copy
™
enabler on the storage
system, then the servers that use SnapView require admsnap software and the servers
that use SAN Copy require the admhost software.
Download and install the appropriate software from Powerlink.
a. From the Powerlink website, select
Support
>
Software Downloads and
Licensing
>
Downloads S
>
software
(
SnapView
or
SANcopy
).
b. Select the Admsnap or Admhost Utility, and then select the option to save the
software to your server.
c. Double-click the executable file to start the installation wizard.
d. Follow the instructions on the installation screens to install the Utility.
G