Output similar to the following is displayed:
Physical Disk ID : 1
Status : Ok
State :
Rebuilding
Write Caching :
Disabled
Media Error Count : 0
Firmware Revision : GS18
Serial Number : R16E 0000R539RP2Z
Device Speed : 6.0 Gb/s
Media Type : Hard Disk Device
Slot Number : 1
Product ID : ST2000NXCLAR2000
Other Error Count : 0
Formatted Size : 1.816 TB
Raw Size : 1.819 TB
Native Command Queueing : Enabled
Link Speed : 12.0 Gb/s
Failure Predicted : No
Enclosure Device ID : 0
Device ID : 9
Rebuild Progress :
1%
Vendor : SEAGATE
Disk Type : SAS
SAS Address : 5000C500837E671C
Predictive Failure Count : 0
The
State
for the hard drive that you replaced should be
Rebuilding
.
Note
If the
State
of the replacement disk drive is not
Rebuilding
, the node has more
serious problems than just a defective hard drive. In this case, contact EMC Customer
Support.
4. Note the values for
Write Caching
,
Rebuild Progress
(a percentage), and
State
(
Rebuilding
).
The RAID rebuild process can take hours to complete. It is finished when
State
is
Online
,
Write Caching
is
Disabled
, and
Rebuild Progress
is
Not Applicable
.
5. Close the terminal window.
Returning the defective CRU
Package the defective CRU and return it to the factory. Use the box and packing from the
replacement CRU.
Replacing a Hard Drive
Returning the defective CRU
23
Содержание Avamar Data Store Gen4T
Страница 1: ...EMC Avamar Data Store Gen4T Customer Service Guide 302 002 891 REV 01...
Страница 4: ...CONTENTS 4 EMC Avamar Data Store Gen4T Customer Service Guide...
Страница 24: ...Replacing a Hard Drive 24 EMC Avamar Data Store Gen4T Customer Service Guide...
Страница 32: ...Replacing a Power Supply 32 EMC Avamar Data Store Gen4T Customer Service Guide...