EMC Avamar Data Store Gen4T Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 32

EMC Avamar Data Store Gen4T Скачать руководство пользователя страница 19

Status : Ok

Slot Number : 4

Enclosure Device ID : 9

Status : Ok

Slot Number : 5

Enclosure Device ID : 9

Status : Ok

In the output above, the hard drive whose status is not

Ok

is the one that must be

replaced. Take note of the

Enclosure Device ID

and

Slot Number

of the hard drive for

use in the remaining tasks.

Note

If all hard drives are

Ok

, confirm the drive bay number for the drive to be replaced.

Contact EMC Customer Support for clarification.

Replacing a hard drive

After identifying the node and the defective hard drive, perform the following steps to
replace the hard drive.

Removing the hard drive

Procedure

1. From the front of the cabinet, press both tabs on the front of the bezel.

Figure 7 Bezel Removal

2. Pull the bezel away straight from the rack.
3. Using the physical disk ID provided by EMC Technical Support and verified above,

locate the defective hard drive.

Replacing a Hard Drive

Replacing a hard drive

19

«
...
17
18
19
20
21
...
»

Содержание Avamar Data Store Gen4T

































Отзывы:

Нет отзывов