EMBRON HATTELAND TECHNOLOGY SCOM X Series Скачать руководство пользователя страница 33

Страница: 33 / 46

Serial/Ethernet Communication (SCOM) Interface

IND100084-14

"?" - Query OSD Command

This command can be used to query the unit for the chosen command and it's current operating value. Note that this

feature is only available when using the Unit OSD Control "MCC" command. This command is a read-only command

which will not change the current value.

"R" / "r" - Reset OSD Command

This command can be used to reset the unit for the chosen command and it's current operating value. Note that this

feature is only available when using the Unit OSD Control "MCC" command. When this command is sent the current

value will be reset back to the original factory default value. The factory default value will vary depending on the

command and/or with customized units. Both "R" (0x52) and "r" (0x72) can be used to execute the reset command.

"+" - Increase OSD Command

This command can be used to increase from the current value of the chosen function and add 1 step or 1 in value to

this parameter. Note that this feature is only available when using the Unit OSD Control "MCC" command.

This command is a write command which will change the current value.

"-" - Decrease OSD Command

This command can be used to decrease from the current value of the chosen function and substract 1 step or 1 in

value to this parameter. Note that this feature is only available when using the Unit OSD Control "MCC" command.

This command is a write command which will change the current value.

Содержание HATTELAND TECHNOLOGY SCOM X Series















































Результаты поиска

Содержание HATTELAND TECHNOLOGY SCOM X Series

Отзывы:

Похожие инструкции для HATTELAND TECHNOLOGY SCOM X Series

Бренды по названию

Популярные бренды

EMBRON HATTELAND TECHNOLOGY SCOM X Series, Техническое руководство

Результаты поиска

Содержание HATTELAND TECHNOLOGY SCOM X Series

Отзывы:

Похожие инструкции для HATTELAND TECHNOLOGY SCOM X Series

Бренды по названию

Популярные бренды