Powering the Desk Sign
INSTALLATION GUIDE
06
Follow the steps below to connect your Desk Sign to power:
1.
Remove the cable cover from the back of
the device as shown below:
2.
Connect the USB-C end of the USB cable
provided into the USB-C adaptor into the
back of the device. Alternatively, connect an
Ethernet cable into the Ethernet adaptor
into the back of the device.
3.
Replace the cable cover as shown below
and then plug the USB-A end of the USB
cable provided into a USB-A power source.
Alternatively, connect the other side of the
Ethernet cable connected in step 2 to a
Power of Ethernet (PoE) network.
Ethernet adaptor for PoE power or USB-C
adaptor for USB power.