Networking the Desk Sign
INSTALLATION GUIDE
10
Wired network connectivity
Note: Your wired network requires
outbound access to port 443 and port
8883 for the Desk Sign to function.
1.
Connect an Ethernet cable into the
Ethernet adaptor on the back of the Desk
Sign as shown below.
2.
Connect your Desk Sign to power as
described in the Powering the Desk Sign
section of this guide. Once powered up the
Desk Sign will begin to connect over the
wired network as shown below.
Ethernet adaptor
3.
Once successfully connected to the
Embrava DMS, the Desk Sign will pull down its
configuration and display the “Configuration
Successful” screen as shown below.