4
HULK Power
4
of excessive pressure build up. The safety valve
is preset at factory. Do not attempt to make any
adjustments to the safety valve. Periodically pull
the ring on the safety valve end to check that it
is working properly.
5.
RESERVOIR AIR PRESSURE GAUGE -
Indicates pressure of compressed air built up in
the tank.
6.
PRESSURE SWITCH -
Turns the air compressor on and off and will
start the compressor pump automatically when
tank pressure is below the factory-set minimum.
The pressure switch continues to monitor the
pressure and turns the pump off when the
pressure reaches the factory-set maximum.
Always make sure that the
compressor power is in the OFF
position before performing any maintenance or
plugging the compressor into a power supply.
7.
AIR FILTERS -
Ensures the air being pressurized is free of
contaminants and reduces the amount of noise
the pump generates.
Air filters are mounted in Whisper 100 (19, fig.2),
on units that have the Whisper Silencer.
8.
PUMP OUTPUT AIR TUBE -
Conducts the compressed air to the tank as it
leaves the compressor pump.
9.
SIGHT GAUGE -
Allows easy viewing of your air compressor
pump's oil level.
10.
PUMP CYLINDER -
Where the air is pressurized.
11.
MOTOR
12.
CONNECTION BOX -
A place to make connection to electrical power
for the air compressor.
13.
MOTOR WIRING BOX AND CAPACITORS-
Vary the connection to electrical power for the
air compressor.
14.
BELT AND PULLEY GUARD
15.
DRIVEN PUMP PULLEY / FAN
16.
DRIVE PULLEY
17.
TANK (PRESSURE VESSEL) ASME/CRN
CERTIFICATION PLATE
18.
MOUNTING BRACKET FOR "WHISPER" NOISE
SUPPRESSION SYSTEM.
19.
"WHISPER" NOISE SUPPRESSION SYSTEM
mounted (HS05V080Y1- fig 2). Houses air
pre-filters and compressor air filters, which
require routine maintenance.
fig 2
19
20.
TANK ACCESS PLUG
21.
TANK OUTLET WITH BALL VALVE SHUT-OFF
Safety Information
This manual contains very important information to
know and understand. This is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS. To help
understand this information, observe the following:
Danger indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not
avoided, may result in minor or moderate injury.
Notice indicates important
information, that if not followed, may
cause damage to equipment.
Read all manuals included with this
product carefully. Be thoroughly
familiar with the controls and the
proper use of the equipment.
MANUAL
