14
HULK Power
Hulk Warranty Statement
Hulk Power by EMAX Compressor makes the following Warranty guarantee:
●
Standard warranty:
That each compressor unit is free from defects in material, workmanship, and
parts for 1 year from the date of purchase. Hulk Power by EMAX is not reasonable for downtime during
warranty service. If downtime is necessary, it is the purchaser’s discretion and obligation, at purchases
expense, to have a redundant compressor. Warranty repair parts shall only include freight charges for
the first 90 days of the warranty, there after purchase is reasonable for freight charges for warranty
parts.
*Required maintenance schedule to maintain warranty status
a.
All units are shipped with break-in oil and must be changed after the first 50 hours to insure
gasket seating.
b.
Thereafter, oil should be changed every 3 months or 1000 hours whichever occurs first
c. Always maintain proper oil level in unit. If the unit runs out of oil due to neglect, the warranty will
void.
d. Use only EMAX-approved oils in your compressor, or your warranty is void.
●
Extended warranty:
Hulk Power by EMAX will extend your 1-year warranty by 3 years, for a total of 4
years of warranty coverage when you opt to register for the extended warranty plan.
To register your warranty and find the extended warranty options, go to
www.emaxwarranty.com. Details
and options for our extended warranty will be provided online once you enter the required information.
●
Choose the new
SMART OIL™
maintenance kit option to extend your Hulk by EMAX air compressor
pump up to 8 years of coverage!
SMART OIL™
not only extends the life of your compressor pump, it
also can reduce operating noise and can creates further energy savings.
●
Exclusions include *
service such as oil changes, filter replacements, gasket tightening to correct oil
seepage or drive belt tightening and valve cleaning and are not covered under warranty.
Warranty shall be voided under the following conditions:
Failure to routinely change oil and to
maintain clean filtration or exceeding 70% duty cycle resulting in overheating and excessive wear and
tear. Exposing electrical components to rain or water, or installing the unit in a hostile environment
such as acid vapors or any caustic or abrasive matter that may be ingested into the pump, or installing
the unit in an enclosed area where lack or cooling ventilation if present, such as in boiler or equipment
rooms where the ambient air exceeds 100° F
Parts used for warranty purposes must be supplied by EMAX, Inc. Warranty work will be performed be
an approved EMAX, Inc Technician. If any maintenance (other than routine maintenance) is performed
by a non-approved EMAX, Inc. Technician, written pre-approval must be obtained from EMAX, Inc to
prevent voiding this warranty. Failure to fully comply with this warranty and fully comply with the manual
herein will void this warranty.
*All warranties are non-transferable
The oil purchase program is effective as of July 1, 2019