emaux SPV150, Руководство пользователя

Страница: 22 / 29

P a g e | 22
20. WI-FI CONNECTION (for WIFI version)
VS pump Wi-Fi version with control interface build in to control the pump over Wi-Fi in “Wi-Fi
Direct” ONE to ONE and Home Network.
20.1 ENABLE WI-FI
• Connect to AC power and Power ON variable speed pump by
“Run” button after proper piping installation.
•
The pump will start self-pumping and “UUIFI” should display to
show WIFI is ready.
•
If there is no “UUIFI” display, press the “MENU” button and roll down to FI by “
▼
”, press “MODE” and
turn it ON by press “ ” or “
▼
”.
•
Press “Mode” to save setting or press “Speed 3” for cancel.
20.2 Wi-Fi Direct CONNECTION
Wi-Fi Direct connection is a ONE To ONE connection without access Home Network. It is just like a private
controller. It can be connected and control by mobile phone, tablet PC, laptop top or any Wi-Fi enable
devices directly without computer operation system concern. The user interface support most of the popular
web browser.
•
Go to Wi-Fi setting of mobile phone and find “EPVSPV-WiFi” and enter password
“
VS_ _PUMP” for
connection. This is the factory default SSID name and password.
•
Scan the QR code label on the side of the controller unit, it will access the user interface and the browser
show “EPVPUMP.com” which is a virtual domain name without internet connection.
• Or, by typing IP address 192.168.8.1 to access.
20.3 APPLICATION INTERFACE
The user interface can do all the PUMP setting and programming as the control panel on the pump, along
with status display. It easy and comprehensive to use.
•
Touch the “Run/Stop” button to switch the pump ON/OFF.
• Touch the speed “number, 2500”, enter the speed and touch any location of screen for enter. The
pump will run at new speed.
• Press S1-S4 to select the preprogram speed.
• Pump running status, schedule status and error code display at the bottom.
•
Touch the SETTING icon to enter setting page
• Touch “English” next to Emaux logo to select language. The control page support languages in
English, French, German, Italian, Spanish, Russian and Chinese.
• Touch the “SYNC” to set the pump clock, the pump will follow the clock of your Wi-Fi device.
•
Speed 1-4 speed setting is done by slider or direct enter the speed box.
•
Speed 1-4 can be renamed as user prefer in less than 10 characters.
• Schedule 1-4 can set Time On and OFF duration and among Speed 1-4. Schedule can be renamed as
user prefer in less than 10 characters. There is enable and disable switch at the end of each setting
to turn it ON or OFF.
•
Freeze protection default temperature is 4 degree C in 4 or 8 hours running in setting speed.
•
To do any change, touch save to store the change before back to home page.