P5 CONTROL BOX PANEL OPERATION
5. CONTROL BOX PANEL OPERATION
1. switch on the main power switch to turn on the power, the standby button led
will light up.
2. press the standby button, ands the system is entered to operation mode.
3. Z1 Button - long press (3 second) to switch ON / OFF Z1 power. And short press
(1 second) to change color for all the pool lights, connected to the Z1 outlet,
the Z1 Button LED is flashing.
4. Z2 Button - long press (3 second) to switch ON / OFF Z2 power. And short press
(1 second) to change color for all the pool lights, connected to the Z2 outlet,
the Z2 Button LED is flashing.
5. ALL Button - Long or short press to change color for all the pool lights,
connected to the Z1 and Z2 outlet, the ALL Button LED is flashing.
4.1 WIRING DIAGRAM
1. Unscrew the screws from the bottom and take out the housing carefully.
2. Remove the waterproof connector nut and put the transformer 220Vac cable
through it.
3. Mount the two wires on the connector as figure.
The terminal voltage is 220Vac and never mount the light on it directly!!
Color Touch Control Box PCB
Zone 2
Power cord
Zone 1
Power cord
COLORTOUCH REMOTE HANDSET P6
6. COLORTOUCH REMOTE HANDSET
Each Each control box is associated with a ColorTouch remote handset. It
needs to pair the control box and hadset by learning process as below:
6.1 LEARNING PROCESS OF REMOTE
Switch off main power button of the box before pressing the learn key of box.
Then switch on main power button and pressing the Learn Key locate under the
box,the Learn key display is flashing in white color.
While keep pressing Learn Key of box,pressing any key on the ColorTouch
remote. When success link , the mode display on the remote (Emaux Water
drop ‘e’) will be in red color and Learn Key display in the box is out .
If there is one remote for multiple control box, repeat the learning process to
each control box.
6.2 THE REMOTE HANDSET
There are two operation mode to support Colortouch mode and basic
tradition mode for lighting control.
6. RESET Button - Press the button to reset all the pool lights connected to Z1 &
Z1 to cool white color.
