To watch recorded video via TV output:
1. Power OFF the digital video
camera.
2. Insert the terminal of the
audio/video cable into the TV output
port of the camera.
3. Connect the opposite end of the
audio/video cable to the TV:
a. Insert the yellow connector
into the VIDEO IN port of the
TV
b. Insert the red (or white)
connector into the AUDIO IN
port of the TV.
4. Power ON the digital video camera.
5. Place the digital video camera in the PLAYBACK mode.
6. Press the LEFT (
Ż
) or RIGHT (
Ź
) arrow keys to scroll through the
recorded data files.
7. When the desired file is located, press the OK/shutter key (
) to play
the video.
8. During playback, the following functions are available by pressing the
keys, as indicated:
Ź
— RIGHT arrow key = FAST FORWARD
Ż
— LEFT arrow key
= REWIND
— OK/Shutter key
= PAUSE/RESUME
Ÿ
— UP arrow key
= ZOOM IN
ź
— DOWN arrow key = ZOOM OUT
9. Press the MODE key to exit the PLAYBACK mode.
10. Power OFF the digital video camera.
11. Disconnect the audio/video cable from the camera.
eCam User Manual
Page 15 of 24
