User’s manual r.0805 EQ45 (EN)
www.elyq.com
Page 13/21
T6Config: Switch Program
The functions supported in this section are the following:
¾
Switch A / Switch B
: each switch can be
programmed individually. It is possible to select
between DR (Dual Rate), THRO CUT
1
(throttle cut)
and NOR / ID (normal or idle).
¾
VR (A) / VR (B)
: choose on of these
potentiometers in order to adjust the pitch (by
selecting PITH ADJUST). The other, can be
used for channel mixing.
Transmitter Operation and Control – Mode 1
Elevator
Tail
Pitch
1
In order to check the curves parameters, it can be used to disable the engine.
