44
3.4 Live playback
Click Playback
button to playback the record. Refer to Figure 3-3. You can do complete operation by clicking the buttons on screen.
4 Add IP Cameras
This chapter mainly introduces how to connect multiple IP cameras through NVR. Once you finish adding IP cameras, you can see the live images through
the monitor of the NVR. For 4 CH NVR, you just need to directly connect the IP cameras to the device through PoE network ports. The live images will display
after you connect successfully. Of course, if there are free channels, you can connect the IPC via WAN/ LAN network.
To add IP cameras via LAN:
1-Please go to Main Menu
IP Camera tab. Refer to Fig 4-1. Click “Search” button to search the devices in the same network. (The IPC which supports
the Onvif protocol may be added manually.)
Fig 3-3 Live Playback
Fig 4-1 Device Management
2-Go to the search tab. Click “Refresh” to refresh the searched devices. If the IPC is not in the same local network, you can select the device and click “Setup”
to modify the IP address of the searched device. Refer to Fig 4-3.
Fig 4-2 Add Devices
Note:
If the network of IP cameras and NVR are in LAN, their IP address must be in the same network segment. For example: If the IP address of NVR is
192.168.011.007, the IP address of IP camera must be 192.168.011.XXX.
EN
