36
7” Due Fili Plus porter switchboard
•
for filter active (see below for details on what is displayed and what is not).
•
for filter active and limited to events not served (see below for details on what is displayed and what is not).
In the second and third case, additional information may be added to further restrict the criteria for the type of events dis-
played. If no further information is added, the filter shows all events, as if no filter were applied.
After the icon there may be a number that represents the ID of an indoor unit or a switchboard. This will be the only device
for which events are displayed. To enter this number, hold pressed
for 0.5 seconds, then enter the device ID. To
cancel the ID filter, type 0 and confirm with
.
Note: non-extended switchboards have IDs in the range 201 to 204. Extended switchboards range from 40001 to 40128
for vertical systems and from 40129 to 40144 for horizontal systems.
Further filters may then be activated, depending on the configuration of the switchboard. Filters can in fact only be activated
if the switchboard is enabled to record them (see SaveProg).
They will be shown on the first line of the display, to the right of the filter icon and the ID (if present), in the order indicated in
the following table, regardless of the order in which they were activated. Each filter present indicates show also the relative
event. Note that no filter is managed as show all. Each press of the key causes the relative icon to appear or disappear.
KEY
ICON
MEANING
Missed calls
Denied calls
Door open / closed
Lock
F1
F2
Relay
Use the keys
and
to scroll through only those events that meet the filter criteria.
Note. The line P / T / (N) continues to always show the same values.
If a filter does not return any events, the indication LIST EMPTY is displayed.
