75
GB
Installation area
Keep the following in mind when choosing a location to install the
appliance:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0°C
5. Keep away from heat sources such as coal or gas appliances.
Unpacking the washer dryer
1. Remove the cardboard box and styrofoam packing.
2. Lift the washer dryer and remove the base packing. Make sure the small trian-
gular piece of foam has been removed together with the bottom piece. If not, lay
the appliance on its side, then remove the small piece of foam from the bottom
of the appliance.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Installation
WARNING!
• Stability is important to prevent the
product from wandering!
• Make sure the appliance does not
stand on the power cord.
WARNING!
• Packaging material (e.g. plastic films,
Styrofoam) can be dangerous for
children.
• There is a risk of suffocation! Keep all
packaging well away from children.